Application of five-axis linkage machining Center in mold processing
Five axis linkage machining center structure of the key component of CNC lathe processing. This technology has been widely used in ships, aerospace, cars, light industry, treatment and other high-precision instruments and equipment production occupation. In traditional mold making, the common three are accompanied by the continuous development trend of axial mold processing technology, and some contradictions between traditional column CNC machining centers and three-axis CNC machining centers are gradually displayed. At present, ball turning tools are widely used in mold manufacturing. Although the advantages of using ball head turning tools in mold manufacturing are significant, assuming the replacement of column CNC machining centers, their moral bottom line speed is zero and the machining accuracy is poor. The advantages of five-axis linkage machining management center in mold manufacturing were decomposed and discussed.
In the five-axis linkage machining, the alternative round head turning tool insists on expanding the surface height of the grinding tool, which can greatly change the production and processing time. The principle of the five-axis machining management center is also applicable to side milling with angular surfaces, which can eradicate the rims caused by the ball-end alloy milling cutter, making the process performance of the grinding tool more ideal, and reducing the amount of manual cutting and manual production labor caused by the need to eradicate the surface of the grinding tool.
According to the five-axis linkage processing technology, the steel parts are dealt with the problem that it is necessary to adjust the clamping several times when expanding the Angle from scratch positioning, which not only reduces the time, but also greatly reduces the deviation, saving the large cost of the installation of the steel parts, and the CNC lathe also expands the production and processing of the debris parts, such as expanding the milling of the complex bevel surface, the finish production and processing. The production and processing of cavity are all impossible to carry out by traditional methods.
Five-axis linkage machining commonly used CNC blade tool, correction number of parts can be a production processing. No need to clamp again or the same three-axis production processing needs of the tool numerical control blade, can be in the integrated internal mold processing, parts process performance is good.
